HAX

MEASUREMENTS FOR RING SIZES

Rings are generally measured using the inside diameter, the easiest way to determine this is by measuring a ring you already have with a ruler. You must measure it exactly to the center, for this, it helps to draw a cross on a sheet of graph paper and place its ring on top, so that the center of the cross is just the same distance from each of its four ends. Then place the ruler on the ring and at the same height as the horizontal line and measure the internal diameter.

The ring you choose to take your size should be as wide or narrow as the model you are going to order (approximately), since the size varies according to the width of the ring. Very wide rings are usually a little larger than narrow ones.

The sizes that come in our menu are based on American measurements. We can offer 1/2 sizes if you need it. 

MANUFACTURING TIME

All our products are made entirely by hand and require an approximate time of one week, from the date of your order, unless we have it in stock, being so, the shipment will be immediate.

NATURAL COLORING OF METAL

White silver acquires a dark patina over time and is different in each person, according to the PH of whoever wears it.

The black patina worn by some pieces in this collection takes on different tones in each one of them and will gradually transform with use; It will be polished in its smoothest areas, showing over time, the sparkles of silver.

Or, if it is plated in 24k gold, it will gradually acquire an antique gold tone, different for each individual, due to the silver or bronze underneath (as the case may be).

These changing characteristics are an important part of the intrinsic value of the piece, giving it a personal character to each one, achieving almost mimicry with its wearer, due to its personal chemistry and according to its lifestyle.  However, it can be cleaned and looked like new if you wish.

RECOMMENDED MAINTENANCE AND CLEANING

It is recommended NOT to expose your CUATA piece to chlorinated pool water, detergents, creams or perfumes. Clean it with a dry cloth after use, to remove grease and impurities and always keep it in its suede bag.

If you want to clean your part from time to time, to keep it looking like new, we recommend the following:

SILVER: immerse the entire piece in silver cleaning liquid, as long as you want it to be totally white, it is not recommended for pieces with patina or antique finish, for this we recommend the use of a special cloth to clean silver pieces.

VERMEIL AND BRONZE COVERED IN SILVER / GOLD: Dip the piece in 1 cup of very hot water with 1 teaspoon of baking soda dissolved in it and when the water is warm, rub gently with your fingers or with a very soft toothbrush.